IP68 25000 Lux Miners Headlamp is a new type of
environmental-friendly Mining Cap Lights
1.Features for mining cap lights
LED Light Source:Cree Usage:Industrial Power Source:Rechargeable
Battery Lighting Period (h):>12 Battery Type:Lithium Ion
Certification:UL,EMC,CCC,CE,RoHS,LVD,FCC IP Rating:IP68 Lamp Body
Material:PC Base Type:PAR36 Warranty(Year):1 Lamp Power(W):3
Material:Germany Bayer PC Light source:LED charging way:
conventional charging way working time:more than 13h battey
typy:rechargeable li-ion battery Item Type:Explosion-proof Lights
Lamp Luminous Flux(lm):390 Color Temperature(CCT):Warm White
A. Safe and Reliable:
Safe and Explosion-Proof meets the relevant International
Standards.The caplamp is equipped with circuit protection which
prevents overchage and short circuit.The short circuit protector
also has recovery function. This ensures an absolutely safe and
reliable working condition for users.
B. Ergonomic Design and Light Weight:
GL12-A have modular assembly with tamperproof design which
perfectly fits the user’s helmet.Compared with the traditional cap
lamp weighing 750g, GL12-A only have 490g which is more portable.
C. Longer Working Period and Brighter Illumination:
GL12-A cap lamp can be working more than 13 hours after it is fully
charged and provide consistent bright illumination of more than
25,000 lux for the entire duration of use.And more than 25hours for
the working lighting mode.
D. Maintenance Free and Environment Friendly:
Lithium-ion batteries are provided in this lamp which is small size
with bigger battery capacity , can keep long working time. And it
is maintenance free and enviroment friendly.
E. Waterproof Design:
GL12-A cap lamp has a high water-proof protection confirming to
2.Specification of miners head lamp
|Light source||Main LED power||3W||3W|
|illumimous flux||≥390 lum||≥390 lum|
|lighting degree||≥25000(for 1M)Lux||≥15000(for 1M)Lux|
|lifetime||1000 cycles||1000 cycles|
|Continuous lighting time||13h||17h|
|Weight (single lamp)||520G||500G|
|Type of protection||CE,ATEX,EXIB II M1||CE,ATEX,EXIB II M1|
3.Mining Safety cap lamp Product Imag
- The LED cap lamp with two lighting modes. You can push on the
switch button on lamp head to change from the main lighting source
to subsidiary lighting source or to turn off the lamp.
- In the first time using lamps,pls use our special charger or
accepted charging rack to charging lamps firstly.when the lamps are
under charging,charger indicated light is RED COLOR,when the
charger indicated light turned GREEN COLOR,it mean that charger
have finished to charging.
- To use the cap lamp, you have to let the waistband to go through
the waistband ring on battery box and tie it well. Then clip the
lamp head on the cap, check the cable and turn the switch on.
4.Troubles and troubleshootings
|Trouble description||Trouble analysis||Troubleshooting|
Light is not on when pressing
Battery power is used up or
Automatic opening protection
|Charge the lamp|
Working time is less than
|Battery is not fully charged|
Make sure the lamp well
connected to the charger
|Longer charging time||The charging points poor contact|
Clean the charging points
and the slot
|Low illuminance||Dirty lens||Clean water wash lens|
Usage:canoeing;camping;fishing;exploring caves and walk at night etc.
5. Safety warning
a) Please donot shoot at eyes directly while the lamp is working
since the strong light will hurt eyes.
b) Please do not disassemble the cap lamp, otherwise it maybe cause
potential troubles related to safety, reliability to work
c) Please do not charge the lamp underground.
d) Please keep the lamp away from fire sources.
If you interested in our products, Welcome to contact us.
Whatsapp & Tel : +86 13640986035